$280.00$325.00

This is a package for guards that have to be mounted from the rear of the saw.  Need a rear mounted guard?  Here’s your solution.  Known compatible models are below.  This includes a three different height splitter set.  The Shark Guard will attach to two of them.  The third is a stubby splitter that is used for non-through cuts.  As always, let us know your exact model when ordering.  The prices shown reflect the lower brackets in the price as well.  If you already have the OEM rear bracket, this will save you some expense as we make smaller brackets that attach the splitters to the OEM.  If you have an aftermarket fence rail installed on the back of the table, i.e Incra fences, have no fear –we have a solution for that scenario as well.  All you have to do is add spacers to the bracket at the mounting point to bring the entire bracket back far enough to clear the fence rail.  We make longer splitters in that case.  Contact us for splitter only pricing.  To order this whole package just choose the options in the drop boxes, add it to your cart and check out.  We will need to know the exact model of your saw as always.

Models (included but not limited to):

Craftsman 113.298030 through 113.299510

Craftsman 315.228310 through 315.248200

Delta TS350, etc.

Delta 34-670, 34-680

Jet JTS

Ridgid TS2400

Ridgid TS24000

Ridgid TS24001

Ridgid TS2400LS

Ridgid TS2410LS

Ridgid TS24120

Ridgid TS24240

Ridgid TS24241

Ridgid TS36120

Ridgid TS3650

Ridgid TS3660

Clear
SKU: N/A Category:

Description

This is a package for guards that have to be mounted from the rear of the saw.  Need a rear mounted guard?  Here’s your solution.  This includes a three different height splitter set.  The Shark Guard will attach to two of them.  The third is a stubby splitter that is used for non-through cuts.  As always, let us know your exact model when ordering.  The prices shown reflect the lower brackets in the price as well.  If you already have the OEM rear bracket, this will save you some expense as we make smaller brackets that attach the splitters to the OEM.  If you have an aftermarket fence rail installed on the back of the table, i.e Incra fences, have no fear –we have a solution for that scenario as well.  All you have to do is add spacers to the bracket at the mounting point to bring the entire bracket back far enough to clear the fence rail.  We make longer splitters in that case.  Contact us for splitter only pricing.  To order this whole package just choose the options in the drop boxes, add it to your cart and check out.  We will need to know the exact model of your saw as always.

Models (included but not limited to):

Craftsman 113.298030 through 113.299510

Craftsman 315.228310 through 315.248200

Delta TS350, etc.

Delta 34-670, 34-680

Jet JTS

Ridgid TS2400

Ridgid TS24000

Ridgid TS24001

Ridgid TS2400LS

Ridgid TS2410LS

Ridgid TS24120

Ridgid TS24240

Ridgid TS24241

Ridgid TS36120

Ridgid TS3650

Ridgid TS3660

 

Additional information

Dust Port Size

2.5", 3.0", 4.0"

Splitter Thickness

.090", .105", .120

Leave a Reply

Your email address will not be published. Required fields are marked *