$275.00$340.00

Everything you need in one package! This setup includes the original SharkGuard dust collecting blade guard, clamp assembly, and suitable splitter set or riving knife for your particular model. Our splitters are 3 different heights, two for attaching the guard to and one stubby for non through cuts.  The different height splitters are for different thickness stock.  This helps to cut off the air flow at the base of the guard and aids in dust collection – it attaches behind the blade below the throat plate. You will no longer need the standard rear splitter mount (should be removed).

On all orders for the PM 66, as well as other older saws with this type of setup, a 3/8″ – 16 quick release ratcheting handle is provided to replace the inner OEM splitter mounting bolt. Making installation is a tool free operation!

Please choose your dust port size and splitter thickness from the menus found below.  If you want your name engraved on the splitters or knife, you can add that as well.

As always, fill out an inquiry when placing an order.  You may order here, then send us an email to confirm your model number so we know exactly what setup you will need.  Model numbers for this package are below.

 

Only need a splitter or riving knife? Find it here! Please write us with your make and model number (expect a customer service call within 24 hours).

 

Need pawls? Find them here! Please write us with your make and model number (expect a customer service call within 24 hours).

Installation Instructions Here

  •  
SKU: N/A Category:

Description

Everything you need in one package! This setup includes the original SharkGuard dust collecting blade guard, clamp assembly, and suitable splitter set or riving knife for your particular model. Our splitters are 3 different heights, two for attaching the guard to and one stubby for non through cuts.  The different height splitters are for different thickness stock.  This helps to cut off the air flow at the base of the guard and aids in dust collection – it attaches behind the blade below the throat plate. You will no longer need the standard rear splitter mount (should be removed).

On all orders for the PM 66, as well as other older saws with this type of setup, a 3/8″ – 16 quick release ratcheting handle is provided to replace the inner OEM splitter mounting bolt. Making installation is a tool free operation!

Please choose your dust port size and splitter thickness from the menus found below.  If you want your name engraved on the splitters or knife, you can add that as well.

As always, fill out an inquiry when placing an order.  You may order here, then send us an email to confirm your model number so we know exactly what setup you will need.  Model numbers for this package are below.

 

Only need a splitter or riving knife? Find it here! Please write us with your make and model number (expect a customer service call within 24 hours).

 

Need pawls? Find them here! Please write us with your make and model number (expect a customer service call within 24 hours).

Installation Instructions Here

  •  

Additional information

Dust Port Size

No Dust Port, 2.5" Dust Port, 3.0" Dust Port, 4.0" Dust Port

Splitter Thickness

.090" Kerf, .105" Kerf, .120" Kerf

Riving Knife Engraving

Engraved Riving Knife, Plain Riving Knife

You may also like…

Leave a Reply

Your email address will not be published.