Saws Covered by Shark Guard

The Shark Guard SGK1 is the most versatile table saw blade guard and dust collection system on the Planet. They will fit an ever increasing range of old and new table saws.
They can mount on both splitter based saws as well as the newer riving knived type saws. Soon these will be able to mount to an overhead system as well. These products are designed and built in the USA.

Options and Accessories

Here is a list and explanations about the available options and specifications for the Shark Guard SGK1.

Splitter & Riving Knives:

For those that only need splitter sets or riving knives, this link will take you to that page.

Shark Guard Videos

This is a growing list of SG videos. I will add customer videos and my own as time permits.


Current Lead Time:


The lead time for a new order is probably just over 3 months.
We have record order volume currently. There is no need to use Paypal to get on the waiting list. Just send an email with the model and options you would like.
I prefer this method. We could settle up just before your order ships. Feel free to ask about the status of your order or the availability of your particular model or possible lead time at anytime via email.

What's New:



What is brand new is that we are now making all splitters and riving knives out of 304 Stainless Steel. I think these are a better product than the powder coated steel ones were previously. Also as of August 12, 2013, colors will no longer be an option. 99.9% of the orders in the past have been black or red. All new orders from this date will be a combination of black and red. Black screws with mostly red parts of the guard. The splitters and riving knives will of course, be stainless steel brushed finish. We still have R&D in the works for other upgrades and products. With a 4 month plus lead time though, R&D takes a back burner and I get to those as I can. If you want to get on the waiting list for a Shark Guard, just send an email with the details of the order you would like.

Thank you for your interest.

Product Disclaimer

All of the items that you get from us are guaranteed to be of good quality, made from the best material available. If you aren't pleased with the condition of what we send you, you get your money back upon return. As with any aftermarket accessory,


must decide if these are the right additions or modifications for your comfort and safety. There is no way to use your table saw and be RISK FREE. The items that we make are merely safety aids. They will NOT PREVENT injury. They are a deterant to it.

Saws are very dangerous machines. Saws can KILL or MAIM you.

These accessories may not comply with rules and regulations in your area. You must decide for yourself whether to use these accessories or not. It is your safety that is at risk when using any power tool or accessory. Since we cannot be there for each and every setup and cut that you make, we cannot be held responsible for any accidents that occur as a direct result of any information or equipment that you receive from us or this website. You should familiarize yourself with saws and safety techniques in order to use it sucessfully.

Any responsibility for the use of this product(s) ultimately rests on your own shoulders.

Ordering anything from us is an acknowledgement that you understand these risks and responsibilties and that you are willing to accept the consequences of using them. If you are un-certain as to WHO is RESPONSIBLE for the setup and usage of any of these accessories,


Select your saws brand name below

American Flag Waving Shark Logo

Attention Please. If you have an order on our waiting list from July up to now and did not order through Paypal, please email me again. Please use either email address.

A bad thing happened and my backup did not deploy fully. I lost some contact info. Thank You and my apologies for the trouble.
















Mao Shan

Milwaukee Delta




Porter Cable





Saw Stop

Shop Fox

Shop Smith

Steel City



Wadkin Bursgreen

Walker Turner

If you don't see a Shark Guard for your particular saw and are interested in one, please contact us. We would be interested in working with you to develop a splitter design that would make the Shark Guard work on your saw. We are currently working on splitters or riving knives for some saws not listed here.
We may already have a pattern that is not listed yet. We do make models that will cover up to a 14" blade for some saws. I haven't listed many of those models yet, but if you need a larger one, we may have a solution for you.


Links of interest for Shark Guards


SG = OSHA compliancy?
SG Owner's Feedback
SG Photo Gallery
SG Reviews
SG Dust collector setups
SG Version history
Original SG Plans
Good riving knife vs splitter article @ Popular Woodworking.
Good riving knife vs splitter review @ Fine Woodworking
Good riving knife description @ General Machinery
Splitter and Riving knife patterns


first image second image third image third1 image third2 image fourth image fifth image seventh image
themed object
Home of the Shark Guard