Parts

The parts below do not have shipping included. You must email me for a shipping quote. If you wish to add these parts to a Shark Guard order, then no need to ask for a quote. The shipping would be bundled with that already in the guard price.

Current Lead Time:

The lead time for a new order is around 8 to 10 weeks. Because of this, there is no need to use Paypal to get on the waiting list. Just send an email with the model and options you would like. I prefer this method. We could settle up just before your order ships. Feel free to ask about the status of your order or the availability of your particular model at any time via email.

What's New:

We are still developing the overhead mounting systems. There have been several minotr changes during the R&D of these to make them better. Each change adds a bit more time, but we should have something to show in the next couple weeks. If you want to get on the interested list for information about these when it becomes available, just send an email.

Thank you for your interest.

Product Disclaimer

All of the items that you get from us are guaranteed to be of good quality, made from the best material available. If you aren't pleased with the condition of what we send you, you get your money back upon return. As with any aftermarket accessory,

YOU

must decide if these are the right additions or modifications for your comfort and safety. There is no way to use your table saw and be RISK FREE. The items that we make are merely safety aids. They will NOT PREVENT injury. They are a deterant to it.

Saws are very dangerous machines. Saws can KILL or MAIM you.

These accessories may not comply with rules and regulations in your area. You must decide for yourself whether to use these accessories or not. It is your safety that is at risk when using any power tool or accessory. Since we cannot be there for each and every setup and cut that you make, we cannot be held responsible for any accidents that occur as a direct result of any information or equipment that you receive from us or this website. You should familiarize yourself with saws and safety techniques in order to use it sucessfully.

Any responsibility for the use of this product(s) ultimately rests on your own shoulders.

Ordering anything from us is an acknowledgement that you understand these risks and responsibilties and that you are willing to accept the consequences of using them. If you are un-certain as to WHO is RESPONSIBLE for the setup and usage of any of these accessories,

DO NOT PURCHASE THEM.

Parts list for SGK1s

There are parts lists below that will allow you to order parts of the SGK1 blade guard system. Just email your needs to us and we will work out a total cost for you.

Dust Ports

SGK1 Replacement Dust Ports $20

These dust ports are designed for the SGK1. If you want to swap out a dust port to try a different size, then this is where to order.
Please note that additional shipping costs will be needed for this item. If replacing due to a failure on the guard, then that is covered under warranty and you would incure no charge until after 2 years. Then shipping would be charged. We guarantee these parts for the life of the guard. Does not cover scratches and normal wear.

3 Dust Port sizes - 2.5 in - 3 in - 4 in

SGK1 Sides

Both Sides - Left and Right- Lexan parts only! $25

This is both side parts milled and ready to replace on your SGK1 should the need arise.
Please note that additional shipping costs will be needed for this item. If replacing due to a failure on the guard, then that is covered under warranty and you would incure no charge until after 2 years. Then shipping would be charged. We guarantee these parts for the life of the guard. Does not cover scratches and normal wear.

SGK1 Hardware Kit

SGK1 Hardware Kit $25

This is the hardware needed for the SGK1 guard only. It includes the barrel bolts, roller, standoffs, screws, tail plate and tail hook safety latch. You can select your color choice below.
Please note that additional shipping costs will be needed for this item.

SGK1 Front Piece

SGK1 Front polycarbonate piece only $5

This is the Front polycarbonate piece needed for the SGK1 guard only. You can order this to replace one that has lost it's clarity. You will receive two of these in this package. One is a spare.
Please note that additional shipping costs will be needed for this item. If replacing due to a failure on the guard, then that is covered under warranty and you would incure no charge until after 2 years. Then shipping would be charged. We guarantee these parts for the life of the guard. Does not cover scratches and normal wear.

Clamp Assembly

Clamp Assembly Without Anti-Kickback Pawls $25

This is the clamp part that mounts on the top of the splitters or the riving knives and the SGK1 subsequently rides on it.
Please note that additional shipping costs will be needed for this item.

Anti-Kickback Pawls

Anti-Kickback Pawls and Springs Only $10

These are Anti-Kickback Pawls and the springs along with two button head cap screws and two set screws (Allen Wrenches Included). These will mount on the clamp to complete that assembly if pawls are desired.

Replacement SGK1 Guard

Replacement SGK1 Guard Covers Only $70

These are replacement covers. They are complete fully assembled covers with all the cover hardware. No splitters or clamps. You can select the dust port size you would like installed on this replacement.