CNC Mill Project

Current Lead Time:

The lead time for a new order is around 8 to 10 weeks. Because of this, there is no need to use Paypal to get on the waiting list. Just send an email with the model and options you would like. I prefer this method. We could settle up just before your order ships. Feel free to ask about the status of your order or the availability of your particular model at any time via email.

What's New:

We are still developing the overhead mounting systems. There have been several minotr changes during the R&D of these to make them better. Each change adds a bit more time, but we should have something to show in the next couple weeks. If you want to get on the interested list for information about these when it becomes available, just send an email.

Thank you for your interest.

Product Disclaimer

All of the items that you get from us are guaranteed to be of good quality, made from the best material available. If you aren't pleased with the condition of what we send you, you get your money back upon return. As with any aftermarket accessory,

YOU

must decide if these are the right additions or modifications for your comfort and safety. There is no way to use your table saw and be RISK FREE. The items that we make are merely safety aids. They will NOT PREVENT injury. They are a deterant to it.

Saws are very dangerous machines. Saws can KILL or MAIM you.

These accessories may not comply with rules and regulations in your area. You must decide for yourself whether to use these accessories or not. It is your safety that is at risk when using any power tool or accessory. Since we cannot be there for each and every setup and cut that you make, we cannot be held responsible for any accidents that occur as a direct result of any information or equipment that you receive from us or this website. You should familiarize yourself with saws and safety techniques in order to use it sucessfully.

Any responsibility for the use of this product(s) ultimately rests on your own shoulders.

Ordering anything from us is an acknowledgement that you understand these risks and responsibilties and that you are willing to accept the consequences of using them. If you are un-certain as to WHO is RESPONSIBLE for the setup and usage of any of these accessories,

DO NOT PURCHASE THEM.

CNC Mill Build Log

Here is a link to my CNC Mill build project as logged at

CNC ZONE.

It's time I started a build log on this I think. I had originally intended to convert an X2 to cnc, but have decided to forgo that and just build one from scratch. This way, I can not only use the X2 mill during the build, but I can build it a little bigger and heavier. Heavy? I thought I saw 80/20 in the thread title.
It's no mistake. I will be using the big 80/20 extrusions. 3060 with is 3" x 6". They are fairly heavy for aluminum. I will add to that as this log progresses.
There are several different aspects to this design that have sparked not only controversy in some threads, but my curiosity as well. Firstly the stiffening up or filling of the extrusions with hydraulic cement. Not just filling with cement, but also adding threaded rod as well as small rebar and #8 bird shot that I have been hoarding for years, Really just trying to get rid of it, but I think the extra weight they might provide to the mix will help. The rebar to take up space. The threaded rod to actually tension the cement in each extrusion.
I intend to use the same mill head that is on the X2, but with some modifications eventually. I know this mill cannot turn out any worse than converting an X2, although that would be much cheaper. I intend to document and weigh all the parts as well so I can get an idea just what the finished machine weighs. Ultimately, it will have a mister and be caged in.
I have a few pics to show now and more will follow as it progresses. This will take some time. I finished my router in around a month, but I expect this to take longer.
I have most all the parts needed and will list those out later with photos. These pics show why its good to over build sometimes. I originally intended for my router to just cut mostly plastic, but it does a fine job on aluminum as well.
I don't have a grinder or access to one. The 80/20 extrusions are somewhat flat, but not good enough for this. The absolute flattest thing I have in the shop is my cnc router table. I used a 1/2" carbide end mill to face both big extrusions. I took off about .0075". Then I scraped the fuzz off with a jointer blade in a hand scraper. That left the surface as flat as I'll ever get it. Good enough to start this show at any rate.

Click the link above to go to the build log at the CNC Zone and continue reading. Thanks.

Home of the Shark Guard